You will need to consult with the documentation for your specific application for this, but usually there is a preferences menu where you will need to enable the Integra-7 so it can be used by your software. Activate or enable the Integra-7 in your music software. On a PC, open the Device Manager and confirm that the Integra-7 is listed under "Sound, video, and game controllers."Ĩ.On a Macintosh, look in the Audio MIDI Setup utility and confirm that the Integra-7 is listed in the MIDI Studio and also the Audio window.Confirm that the USB driver is installed correctly and that the computer is communicating correctly with the Integra-7. Note: If you are using a Windows 10 computer, the driver will be automatically downloaded and installed when you connect the Integra-7 to your computer.ħ. This may include re-starting your computer. Once downloaded, you will need to run the setup application to install the driver into your system. Make sure you download the driver that corresponds to the type of computer you have (Mac or Windows-based) and the version of operating system you are using. You can download the latest drivers from our website here. Download and install the Integra-7 USB driver for your computer and connect the USB cable. Cursor to "USB Driver" and use the Value Dial to set this to "Vendor (MIDI+Audio)." You will need to cursor to "WRITE" and press ENTER to proceed.Ħ. Use the buttons to select the "Setup" tab at the top of the screen.Ĥ. The functionality and operation of the Integra-7 and your computer-based application(s) will be the same no matter which type of connection you are using - the only difference is how the MIDI and Audio signals are routed.Ĭonnecting your Integra-7 to a computer using the direct USB connectionģ. This is useful it you already have a Audio/MIDI interface connected to your system, or if there is not a USB driver available for your computer. This will use the MIDI In and MIDI Out ports on the back panel of the Integra-7, as well as the Audio Outputs (left / right) which will connect to the interface, and the interface will then connect to a standard USB port on your computer.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |